Bottle feeding - nutrition and safety

Breastmilk or a suitable infant formula is recommended as the main source of nutrition for all babies less than 12 months of age. Breastmilk is the feeding option of choice, but commercial infant formula is the only suitable alternative when breastmilk is not available.

Babies under 12 months of age should not be fed:

• regular, low-fat or skim cow’s milk
• evaporated or powdered milk, sweetened condensed milk
• cereal and legume-based beverages (such as rice, oat or soy)
• nut and seed-based beverages (such as almond or pumpkin seed)
• any do-it-yourself preparations using homemade recipes.

Commercial infant formulas have been developed to contain similar nutrition to breastmilk. They provide all the nutrition your baby needs until you introduce solids at around 6 months. All formulas sold in Australia conform to the Australia New Zealand Food Standard Code (Standard 2.9.1 – Infant Formula Products). There is little difference between differently priced brands.

The composition of infant formula continues to change as research provides a greater understanding of the role of the unique ingredients contained in breastmilk. A variety of new ingredients have been added to infant formulas in recent years.

Starter or first formula

There are many infant formulas available that are suitable from birth. These are often called “stage 1” or “starter” formulas. These are usually based on cow’s milk protein (whey or casein).

It is recommended to use a cow's milk based formula unless your baby has a medical issue that requires a different type of formula. These formulas are suitable for babies from birth to 12 months.

Read the label carefully:

• Formulas developed for toddlers as well as pregnant women can look very similar, so check the label carefully to ensure your baby gets a formula that is safe and appropriate for their age.
• The label may list a number of additions such as LCPUFAs (long chain polyunsaturated fatty acids or omega-3 fatty acids), probiotics or prebiotics. These ingredients are added because they are found naturally in breastmilk.

Caution on changing formula

If your child is unsettled, ‘colicky’ or has difficulty feeding, you may think you need to change the formula you are using. This isn’t helpful for the majority of babies. Seek the advice of your maternal and child health nurse or doctor before switching formulas.

Soy and rice formulas

Soy and rice based infant formulas are suitable for babies with a medical reason to use them, such as an allergy to cow’s milk. These formulas must not be confused with regular soy or rice milks, which do not provide suitable nutrition for babies.

‘Follow on’ formula

‘Follow on’ or 'stage 2' formulas are suitable for babies 6 months of age and over. You can choose to change to one of these or to continue with the starter formula your baby is already drinking. These formulas are not better for your baby than the 'starter' or 'stage 1' formulas.

Specialised infant formula

Infant formula can be modified in a variety of ways, including changes to the fat, carbohydrate or protein content. Specialised infant formula is sometimes necessary for babies with certain medical conditions and may be prescribed by paediatricians through the Pharmaceutical Benefits Scheme (PBS).

Reasons for using one of these formulas might include:

• severe allergy or intolerance
• fat or carbohydrate malabsorption
• severe digestive disorders.

Some examples of specialised infant formula and when they are used include:

• Low lactose – is used for lactose (milk sugar) intolerance.
• Modified protein content or hydrolysed – in some formula, the cow’s milk protein is broken down into smaller units. In other formula, the whole protein is replaced by amino acids, the individual building blocks of protein. These preparations are used for severe allergy, malabsorption and digestive disorders or metabolic conditions.
• Modified fat content – this includes formula with a high concentration of triglycerides and lower levels of fatty acids, which may be used for babies with liver or gastrointestinal conditions.
• Thickened formula – sometimes recommended for babies who frequently regurgitate (vomit or cough up) large amounts after feeding, although a thickened formula may not solve this problem. Only use under medical advice.
• Premature infant formula – designed for preterm (born premature) babies while they are preterm. Premature babies sometimes need a formula with additional energy and mineral content. This is not suitable for full-term babies or for preterm babies who are now full term, unless under medical advice.

Seek medical advice before using specialised formula.

Amount of breastmilk or formula required

It’s important to be led by your baby about when to feed and how much to feed. There is no set amount of milk that your baby should have – the volumes below are a guide:

• From 5 days to 3 months, a full-term, healthy baby will need about 150 ml of breastmilk or formula per kilogram of body weight, every day. For example, a baby who weighs 3 kg will need around 450 ml of prepared infant formula each day.
• From 3 to 6 months, this falls to 120 ml of breastmilk or formula per kilogram of body weight each day.
• From 6 to 12 months, it falls again to between 90 and 120 ml of breastmilk or formula per kilogram of body weight each day.

Remember – these amounts are just a guide, some babies will drink more than this and some will drink less. The suggested volumes on the formula tin are often more than what your baby needs. It’s important to listen to your baby’s cues about when they feel hungry and when they feel full. Never pressure or force your baby to drink a particular amount. See your doctor or maternal and child health nurse if you are worried about your baby’s appetite or growth.

Preparing formula

Always remember to:

• Wash your hands thoroughly and make sure your preparation area is clean.
• Check the date on the bottom of the tin or on the sachet to ensure the formula has not passed its expiry (use-by) date.
• Use the powder within one month of opening the tin.
• Follow the manufacturer’s instructions for preparation strictly. Accuracy is important to make sure your baby receives the right nutrition.
• Boil fresh, clean water in a kettle or saucepan.
• Do not let the water cool for longer than 30 minutes before making up infant formula. Hot water helps kill any bacteria (germs) in the powder.
• Pour the recommended amount of boiled water into the bottle.
• Use the scoop that came with the formula to measure the exact amount of powder. A scoop from another brand of powder might be larger or smaller. Never use a half-scoop as it may not be accurate. Make up the full volume (later throw out any leftover mixture).
• Level the powder with a sterilised knife or spatula (do not pack it down). Add this powder to the bottle of boiled water.
• Place the disc and cap on the bottle, and shake until thoroughly mixed.
• Make up only one bottle at a time. Germs can easily grow in prepared formula, and can make your baby ill.
• Never warm a bottle in a microwave oven. This is unsafe as it does not heat evenly and there may be ‘hot spots’ in the bottle that can burn your baby’s mouth.
• You can warm a bottle by standing it in a container of hot (not boiling) water for 10 minutes.
• Test the temperature by dripping some milk onto the inside of your wrist. It should feel the same temperature as your skin. If it is too warm, then cool the bottle under running water or in a container of cool water. Re-test on your wrist before giving to your baby.
• If you are going out for the day, carry hot water in a hot water flask and the formula separately, then prepare it just before it is needed.
• When the tin of formula is empty, discard the scoop that was provided with the tin of infant formula.
• Read the instructions carefully if you change formula brands to ensure you use the correct amount of water and powder.

Do not use leftover formula

Use a fresh bottle for every feed. Throw away any leftover formula or expressed breastmilk following the feed. Never give your baby leftovers. They can grow bacteria (germs) that may make your baby ill.

Do not add other food, such as baby rice cereal, to the milk. If you think your baby needs more food than recommended, talk to your maternal and child health nurse.

Enjoy bottle feeding with your baby

Bottle feeding is a time to be together and communicate. Just as adults and children enjoy talking with each other at mealtimes, so do babies. Hold your baby close to your body, facing you and talk to them during feeding. This will make feeding a more enjoyable experience for your both.

Feed your baby when they show signs of being hungry, not on a strict schedule. Look for signs from your baby that they have had enough – this could include turning away, frowning or pushing the teat out of their mouth. Take the bottle out of their mouth when you see these signs – they will let you know if they want more.

Do not put your baby to bed with a bottle, or leave them feed alone. This is dangerous because your baby may choke. Also, older children who are regularly fed this way are more likely to get middle-ear infections and tooth decay.

Equipment for bottle-feeding

Whether you are using a bottle for expressed breastmilk or infant formula, the equipment you will need includes:

• expressed breastmilk or infant formula
• clean water
• bottles
• teats
• sterilising equipment (and possibly sterilising chemicals).

Bottles for expressed breastmilk or infant formula

When buying bottles, remember that:

• you will need at least 3 large bottles with leak-proof caps, discs and teats
• bottles should be smooth on the inside surface (no ribbing or indentation), so they are easy to clean properly
• bottles should have clearly marked measurement guides that will not wear off over time.

Teats for bottle-feeding

When choosing teats, consider:

• Flow rate – check the label to make sure the teat has the right flow rate for your baby’s age. For example, a teat designed for an older baby can flood a newborn’s mouth with too much milk and may lead to choking and make feeding stressful for your baby.
• Testing the flow – hold the bottle upside down and milk should drip out at a constant, steady rate. If it drips too slowly, your baby will get tired before finishing their feed. If milk pours out in a stream, your baby may dribble and splutter and will not enjoy the feed. A baby should take around 15 to 30 minutes to drink a bottle.
• Teat shape – many manufacturers claim that their teats are an exact copy of a mother’s nipple in her baby’s mouth, but there is no proof that any teat design is the best. ‘Orthodontic’ teats are no better than regular-shaped teats and they may, in fact, not be good for later tooth development. Over time, you will discover which teat works best for your baby.
• Air – air bubbles should rise through the milk as the baby drinks. If the teat flattens during feeding, loosen the cap a little.

Sterilise all equipment for bottle-feeding

You should sterilise (thoroughly clean and kill all germs) all bottle-feeding equipment until your baby is 12 months old. This is very important.

Always remember:

• Steam can cause severe skin burns, so be careful when boiling or steaming equipment.
• Place all equipment out of reach of children.
• Avoid unnecessary handling of sterilised equipment and do not touch the inner surfaces of bottles or teats.

First, wash all the equipment in warm, soapy water. Use a clean bottlebrush to thoroughly remove all traces of milk, then rinse, then sterilise. You can use different sterilising methods, such as boiling, chemicals, steam or microwave steam.

Boiling bottle-feeding equipment

Put all equipment in a large pot and cover with tap water (make sure your water meets the Australian Drinking Water Guidelines if you are not using town water).

Remember to:

• Make sure there are no air bubbles trapped inside the bottles.
• Put the saucepan lid on and bring to the boil.
• Allow 5 minutes of rapid boiling.
• Turn off heat and allow to cool.
• Always wash your hands thoroughly with soap and water before handling the equipment.
• Store the sterilised equipment in a clean container in the fridge and re-boil after 24 hours if it has not been used before then.

Chemical sterilising bottle-feeding equipment

Sterilising chemicals usually come in liquid or tablet form. When you sterilise the equipment:

• Follow the manufacturer’s instructions to get the correct strength.
• Mix the chemicals with water in a large plastic or glass bowl.
• Place all equipment in the solution. Cover every surface – for example, squirt solution through the teats and get rid of any air bubbles.
• Soak for at least one hour.
• Remove the equipment and shake off excess solution, but do not rinse.
• Use only glass or plastic equipment, as metal will rust in the solution.
• Change the solution every 24 hours.
• Scrub the container with warm soapy water and rinse thoroughly before refilling with new solution.

Steam sterilising bottle-feeding equipment

A steam steriliser plugs into a power point. It works automatically once you have switched it on. You must follow the manufacturer’s directions. Most will tell you to:

• Place the equipment in the steriliser and add the correct amount of water.
• Put the lid on and steam the equipment for the recommended time.
• Leave the lid on the steriliser until the bottles are needed.
• Wipe and dry the inside of the container once a day to keep it clean.

Microwave steam sterilising bottle-feeding equipment

This is used in a microwave oven. You should:

• Follow the instructions carefully.
• Check the microwave power needed – not all microwave ovens are the same.
• Do not put any metal inside these sterilisers.

Where to get help

• Your maternal and child health nurse
• Your GP (doctor)
• Your paediatrician
• Maternal and Child Health Line Tel. 13 22 29 (24 hours, 7 days)
• Australian Breastfeeding Association Breastfeeding Helpline Tel. 1800 686 268
• A lactation consultant – contact Lactation Consultants of Australia and New Zealand (LCANZ)